Washer Operation
Start Up
When power is applied to the washer, the control will display its
software version as
S---
(
---
is the version number) for two
seconds. If the control was not powered down during a running
cycle, it will enter the Ready Mode.
Ready Mode
TLW2R_SVG
Figure 2
In Ready Mode, the PERM PRESS/WARM (default cycle) LED
is lit, and the full vend price is displayed as left justified. The
user may select a different cycle, if desired. (In card reader ma-
chines, if the current cycle has a vend price which differs from
the default cycle, the display will be updated to show the new
price.) If another cycle is selected, the control will flash the
amount needed to satisfy the vend shown on the display. If the
vend price is not satisfied within one minute, the washer control
will stop flashing the vend price and return to the default cycle.
The display will continue to show the remaining vend needed to
start a cycle and will credit any vend entered by the user.
Vends may be satisfied by a coin drop, start pulses, or by a third
party card reader. If a coin drop is used, the remaining vend price
will decrease with each coin entry. If start pulses are used, the re-
maining vend price will decrease with each received pulse. Once
the vend is satisfied, the START LED will begin to flash. If a
third party card reader is used, the START LED will begin to
flash when a valid cash card is entered into the reader.
When the START keypad is pressed, the washer will start. The
START LED will stop flashing and the WASH LED will be lit.
The display will change to show the remaining cycle time on the
right side of the display. The appropriate LEDs will light while
the machine passes through different cycle steps. Any coin en-
tered after the first fill cycle will be added to the total coin coun-
ter, but the user will not be able to change cycles.
When a cycle is complete, the Four-Digit Display will show
00
until the lid is opened, a key is pressed, a coin or card is entered,
or a start pulse is received. When one of these instances occurs,
the Four-Digit Display will revert back to the Ready Mode.
Opening the Washer Lid
Opening the washer lid in a running cycle will automatically stop
the cycle, the Four-Digit Display will show
LId
, and the timer
will stop. Once the lid is closed, the cycle will resume from the
point it was interrupted. If the washer lid is opened in the last
three minutes of the cycle, the timer will continue to count down
to the end of the cycle. When the timer control reaches
0
mi-
nutes, the control will return to the Ready Mode.
Signals
There are three instances when a signal may sound during washer
operation. The owner may program the signal to be turned on or
off (refer to
are listed below:
1. Keypad Depression Signal - The signal will sound for .25 sec-
onds each time a keypad is pressed.
2. Coin Input/Start Pulse Input/Card Insertion Signal - The sig-
nal will sound for .25 seconds each time a coin or start pulse
is received or a card is entered.
3. Machine Error Signal - The signal will sound for 15 seconds
if an error occurs.
Washer Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
10
Part No. 202713ENR1
Содержание BWNBC2PP112TW01
Страница 2: ......
