Alliance Laundry Systems BWNBC2PP112TW01, Программирование

Страница: 8 / 28

Control Identification
SELECT CYCLE Keypads
SELECT CYCLE keypads are used to select the specific washer
cycle. These keypads include NORMAL/HOT, NORMAL/
WARM, PERM PRESS/ WARM, and DELICATES/COLD. The
selection of one of these keypads will light up the corresponding
LED. The default cycle is PERM PRESS/WARM as shipped
from the factory. The SELECT CYCLE keypads are not active
after the first fill cycle of the washer. Pressing the flashing
START keypad will confirm selection and cycle will begin.
START Keypad
The START keypad is used to start the washer after the full vend
price has been satisfied and the washer lid is closed.
Both the START keypad and the SELECT CYCLE keypads are
used in various combinations for programming cycles, retrieving
audit information, running diagnostic tests, and other operations
described in
How to Enter the Manual Mode .
TLW1R_SVG1
1
2
3
5
6
4
1. Four 7-Segment Digits
2. Four-Digit Display
3. LED Status Lights
4. SELECT CYCLE Keypads
5. START Keypad
6. LED Light
Figure 1
Control Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
8 Part No. 202713ENR1