allen MSP475, Инструкция по безопасности и эксплуатации

Страница: 32 / 54

Trowel Operation
Operating The Riding Trowel
To utilize your Allen Engineering MSP475 rider to its fullest capacity the machine should be driven in the direction the
operator is facing. This will finish the widest possible area while giving the operator an excellent view of the slab surface
about to be troweled. When the machine reaches the end of the slab make a 180 degree turn and repeat the straight
line of direction to the other end of the slab. To familiarize a new operator with the riding trowel the following steps
should be taken.
All items in this manual are describe from the
operator “Sitting On Machine” or
SOM for short.
1. Location of all Operating Controls
A. Right Pitch Control
B. Joystick (Forward & Reverse)
C. Joystick (Left & Right, Forward & Reverse)
D. Left Pitch Control
E. Right Foot Pedal
F. Retardant Spray Pushbutton
2. Steering the Riding Trowel
A slight “feathering motion” forward and
backward with the left hand joystick is
required to move the machine in a straight
path to the left. The same motion is required
of the right joystick to move to the right.
E
C
D
F
B
A
Steering Control Diagram
Position ....................... Action
1 .................................. Forward
2 .................................. Reverse
3 .................................. Rotate Clockwise
4 .................................. Rotate Counter-clockwise
5 .................................. Sideways - Left
6 .................................. Sideways - Right
SECTION 2
OPERATIONS
069583 Page 32