allen MSP475, Инструкция по безопасности и эксплуатации

Страница: 34 / 54

Trowel Operation
6. Cruise Control
This machine comes standard with a cruise control function. The cruise will allow the opera-
tor to remove their foot off the foot pedal and still maintain rotor function.
To use the cruise control, enable the foot switch so that the rotors engage, then pull up on the
cruise control button. To release the cruise control, press down on the center button on the
cruise control then pull up slightly to disengage.
7. Pitch Adjustment
Different pitch angles are needed as you work the
different stages of the concrete. When changing or
setting pitch (angle of trowel
blades), slow the machine
down, set the desired degree
of pitch on the left side of the
machine and then adjust the
right side to match.
To change the pitch, the opera-
tor will use the rocker switch
located at the top of either joy-
stick. By pressing the rocker
switch towards the inside, the
pitch will decrease, pressing
the switch toward the outside
of the joystick will increase the
pitch level. (see Figure 2.5).
8. Enable Machine Blades
The machine trowel blades are enabled by the foot pedal ( E ). Hold down the pedal to enable the rotors to begin
turning, release pressure off the pedal to stop the rotors.
Pitch Adjustment
SECTION 2
OPERATIONS
069583 Page 34