allen MSP475, Инструкция по безопасности и эксплуатации

Страница: 9 / 54

069583 Page 9
GENERAL
INFORMATION
Manufacturer’s Codes:
When ordering parts or requesting service information, you will always be asked to specify the model and serial numbers of
the machine. The legends below specifically defines each significant character or group of characters of the Model Number
and Serial Number codes.
Model Number
MSP 475
Model
Series
Serial Number
The serial number found on the identification plate is a ten digit format. The model number identifies your machine and will
ensure that you receive the correct replacement parts.
Serial Number Example
475 01 19 001
Series
Sequence Number
Month
Year
Unit Identification Plate Location:
An identification plate listing the model number and the serial number is attached to each unit and is located on the rear lower left
side of mainframe. Refer below for serial number and model number location. This plate should not be removed at any time.
Please record the information found on this plate below so it will be available should the identification plate become lost or damaged.
When ordering parts or requesting service information, you will always be asked to specify the model and serial numbers of the
machine.
FILL IN FOR FUTURE REFERENCE
Model Number:
Serial Number:
Date Purchased:
Purchased From:
EPA INFORMATION
NAMEPLATE
Model & Serial Number
/ Unit Identification