allen MSP475 Скачать руководство пользователя

Страница: 38 / 54

FUNCTIONS:

• Cruise Control - To use the cruise control, enable the foot switch so that the rotors engage, then press the "Cruise

Control Toggle Switch" in the "ON" direction. To disengage the cruise control function, simply press the "Cruise
Control Toggle Switch" in the "OFF" direction. ”

• Seat Switch - The machine cannot be in RUN RPM unless the seat switch is made. If the operator stands up while

in run RPM, the machine will return to IDLE RPM. The status of this function can be viewed in the IO STATUS screen
under “SEAT SW”.

• Run Light - When the oil temp has reached an acceptable temp, the green light to the right of the operator will illu-

minate.

• Lift-Off - When lifting the machine off the slab, with no operator in the seat, someone can hold the Run/Idle Rocker

to achieve a higher Engine RPM for 5 seconds and press the foot pedal while the machine is being pulled from the
concrete.

The start up screen will display for

5 seconds once power is supplied

to the control unit (the machine

key is turned on). This screen will

display the Allen logo, the Machine

Series Name, and the relevant

software information that is need-

ed for troubleshooting

Engine Control Unit (ECU)

SECTION 2

OPERATIONS

069583

Page 38

Содержание MSP475























































Результаты поиска

Содержание MSP475

Отзывы:

Похожие инструкции для MSP475

Бренды по названию

Популярные бренды

allen MSP475, Инструкция по безопасности и эксплуатации

Результаты поиска

Содержание MSP475

Отзывы:

Похожие инструкции для MSP475

Бренды по названию

Популярные бренды