Allen-Bradley PanelView 800 2711R-T10T, Руководство пользователя, Страница: 69 / 158

Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017 69
Chapter
4
Cable Connections and Communication
Chapter Objectives This chapter provides network and device connections for the terminals.
• Wiring and safety guidelines
• Connecting devices
• MicroLogix controller cable charts
• Micro800 controller cable charts
• CompactLogix 5370 controller cable charts
• Ethernet connection
• Serial connections
• USB Ports
Wiring and Safety
Guidelines
Use publication NFPA 70E Electrical Safety Requirements for Employee
Workplaces, IEC 60364 Electrical Installations in Buildings, or other applicable
wiring safety requirements for the country of installation when wiring the
devices. In addition to the NFPA guidelines:
• connect the device and other similar electronic equipment to its own
branch circuit.
• protect the input power by a fuse or circuit breaker rated at no more than
15 A.
• route incoming power to the device by a separate path from the
communication lines.
• cross power and communication lines at right angles if they must cross.
Communication lines can be installed in the same conduit as low-level dc
I/O lines (less that 10V).
• shield and ground cables appropriately to avoid electromagnetic
interference (EMI).
Grounding minimizes noise from EMI and is a safety measure in electrical
installation.
For more information on grounding recommendations, refer to the National
Electrical Code published by the National Fire Protection Association.