Allen-Bradley 2094-AL09, Руководство по установке

Страница: 43 / 60

Rockwell Automation Publication 2094-IN005H-EN-P - October 2012
Line Interface Module 43
Wiring Diagrams In this example configuration, the servo drive has input power, brake power, and
the start/stop string wired from 2094-AL
xx
S, 2094-BL
xx
S, or 2094-XL75S-C
x
line interface modules. These modules do not contain an AC line filter, so an
external filter is added between the module and the drive.
Figure 37 - Power-interconnect Diagram (line interface module with drive)
L3
L2
L1
1, 3, 5
7
2, 4, 6
8
L3'
L2'
L1'
IO_PWR1
COIL_E1
IO_COM1
COIL_E2
1
2
3
4
5
6
L2/N
L1
1
2
3
4
CTRL 2
CTRL 1
1
2
1
2
3
4
1
2
L3
L2
L1
1
2
3
4
AUX2_L1
AUX2_L2
AUX1_L1
AUX1_L2
IO_PWR2
IO_COM2
IO_PWR2
IO_COM2
IO_PWR2
IO_COM2
Control Power
Connections
* INDICATES USER SUPPLIED COMPONENT
Contactor Enable
Connections
24V for motor brake or
other as needed
24V for motor brake or
other as needed
24V for motor brake or
other as needed
Bonded Cabinet
Ground Bus *
VAC LINE
3-phase (IPL) Input
195-264V AC RMS
or 324-528V AC RMS
Ground Stud
VAC LOAD
3-phase (OPL) Output
195-264V AC RMS
or 324-528V AC RMS
STOP *
I/O (IOL)
Connector
2094-AL
xx
S, 2094-BL
xx
S, or
2094-XL75S-C
x
Line Interface Module
Ground and
3-phase
Input Connections
Control Power
Single-phase (CPL) Output
195-264V AC RMS
3-phase
AC Line Filter *
Auxiliary Power
Single-phase (APL) Input
93-121V AC RMS
or 196-253V AC RMS
(This connector is present
only on the 2094-XL75S-C x )
Drive Module *
Auxiliary
Power Output
(P2L) Connector
Auxiliary power for use
as needed
Auxiliary power for use
as needed
Brake and I/O Output
(P1L) Connector