Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 156

Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 12

12

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

Chapter 1

POINT Guard I/O Overview

Before You Begin

Always observe the following guidelines when using a module, noting that in this
manual we use safety administrator to mean a person qualified, authorized, and
responsible to secure safety in the design, installation, operation, maintenance,
and disposal of the ‘machine’:

•

Thoroughly read and understand this manual before installing and
operating the module. Also refer to the related documentation as necessary,
listed in the

•

Keep this manual in a safe place where personnel can refer to it when
necessary.

•

Use the module properly according to the installation environment,
performance, and functions of the machine.

•

Verify that a safety administrator conducts a risk assessment on the
machine and determines module suitability before installation.

Verify that the POINT Guard I/O firmware revision is correct prior to
commissioning the safety system, noting that firmware information related to
safety controllers is available at

h ttp://www.rockwellautomation.com/products/

certification/safety

Understand

Suitability for Use

Rockwell Automation is not responsible for conformity with any standards,
codes, or regulations that apply to the combination of the products in your
application or use of the product.

Take all necessary steps to determine the suitability of the product for the
systems, machine, and equipment with which it is used.

Know and observe all prohibitions of use applicable to this product.

Never use the products for an application involving serious risk to life or property
without making sure that the system as a whole was designed to address the risks
and that the Rockwell Automation product is properly rated and installed for the
intended use within the overall equipment or system.

Follow Precautions for Use

ATTENTION:

Safety state of the outputs is defined as the off

state. For complete details of the safety state of inputs, be sure
to review

Safety state of the module and its data is defined as the off state.

Use the POINT Guard I/O module only in applications where the off
state is the safety state.

Serious injury may occur due to breakdown of safety outputs. Do
not connect loads beyond the rated value to the safety outputs.

Serious injury may occur due to loss of required safety functions.
Wire the module properly so that supply voltages or voltages for
loads do

not

touch the safety outputs accidentally or inadvertently.

«
...
10
11
12
13
14
...
»

Содержание 1734-IB8S





























































































































































Отзывы:

Нет отзывов