ALLEN & HEATH XONE DX Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 66

background image

Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 18

MASTER SECTION

CHANNEL METERS

  The Channel Meters display the level of the Main Mix Bus.  The meter display is
  sourced pre Master level and so does not represent the signal level on the outputs.
  During normal operation the meters display the level of the left and right channel of
  the program material.

  In SPLIT CUE mode, the left meter displays the level of the CUE signal and the right
  meter displays the level of the program signal.

MASTER / BOOTH  LEVEL CONTROLS

                             MASTER - the Master control adjusts the Master output level of the Xone:DX.  The
                             Master output is provided by balanced XLR connectors and unbalanced Phono/RCA
                             connectors.

                             BOOTH - the Booth control adjusts the Booth output level of the Xone:DX.  This
                             allows for adjustment of the DJ booth monitor speaker without altering the Master
                             output level.

LIBRARY NAVIGATION

See Page 19.

HEADPHONE MONITORING

                             PHONES LEVEL CONTROL -  adjusts the level of the signal sent to the head
                             phones.  The headphones can be connected to the Xone:DX via 1/4 inch and 3.5mm
                             Jack sockets.

                             SPLIT CUE -  The Split Cue button sets the monitoring system to Split Cue mode,
                             illuminating the corresponding LED.



!

Warning  !    To  avoid  damage  to  your
hearing  do  not  operate  the  headphones  or
sound  system  at  excessively  high  volume.
Continued  exposure  to  high  volume  sound
can cause frequency selective or wide range
hearing loss.

«
...
16
17
18
19
20
...
»

Содержание XONE DX



































































Отзывы:

Нет отзывов

Похожие инструкции для XONE DX

Бренд: OMCA Страницы: 72

Бренд: Barko Hydraulics Страницы: 92

Бренд: THORLABS Страницы: 44

Бренд: ParaBody Страницы: 4

WJHD309A - DIGITAL DISK RECORDER

Бренд: Panasonic Страницы: 79

Бренд: AAON Страницы: 36

Бренд: Cannon Страницы: 40

Бренд: NARGESA Страницы: 34

Бренд: Taylor Страницы: 60

Бренд: TANDBERG Страницы: 23

Бренд: Backyard Play Systems Страницы: 73

Бренд: Mackie Страницы: 34

Бренд: Mackworth Страницы: 38

Бренд: P&P Страницы: 6

Бренд: XanLite Страницы: 4

i-Digits Access

Бренд: Össur Страницы: 231

Бренд: Stiga Страницы: 20

Бренд: Ultrasport Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды