ALLEN & HEATH XONE DX Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 66

background image

Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 14

REAR CONNECTORS

SPDIF DIGITAL INPUT AND OUTPUTS
SPDIF is a popular digital audio interfacing standard for connecting two channel (stereo) audio

using a single COAX (RCA phono socket) or OPTICAL (TOSLINK socket) cable.

For reliable connection use a 75 ohm COAX cable intended for this function.  Avoid the use of
cheap  audio  cables.    Use  purpose  made  optical  fibre  cables  for  connection  using  the  Toslink
port.  Make sure the blanking plug provided is fitted to any unused Toslink sockets.
The SPDIF input and outputs are available only when your computer is connected via the USB
port.  The computer provides the clocks needed for the soundcard to function.

Sample rates of 44.1, 48, 88.2 and 96kHz are supported.

16

MIDI IN / OUT

Connect to either a MIDI interface or directly to MIDI compatible equipment using a

standard 5 pin DIN (MIDI) lead. The MIDI output socket data duplicates what is sent via
the USB connection to the PC.

Incoming MIDI is merged with the Xone:DX MIDI and transported, via USB, to the PC

or Mac. Incoming MIDI data can also be used to remotely control the status of the LEDs
on the surface.

17

USB CONNECTOR

USB (Universal Serial Bus) V2.0 is an external peripheral interface standard for data

transmission. The Xone:DX USB works at 480Mbps and provides up to 20
uncompressed audio channels.

The USB connection is used to send/receive audio and MIDI data between the Xone:DX
and the connected computer. Use a standard USB type A to B lead to connect to your
computer. This is supplied with the Xone:DX.

18

16 17 18

19

CABLE RETAINING CLIP

Cable retaining clip for USB and Power Supply cables.

19

«
...
12
13
14
15
16
...
»

Содержание XONE DX



































































Отзывы:

Нет отзывов

Похожие инструкции для XONE DX

Бренд: ABB Страницы: 11

Бренд: Taber Страницы: 27

Бренд: GE Страницы: 24

Бренд: Makita Страницы: 8

Бренд: VECTECH Страницы: 5

Бренд: ACDC Страницы: 4

Бренд: Faderfox Страницы: 8

Бренд: Warehouse-lighting Страницы: 3

Бренд: Eagle Group Страницы: 8

Бренд: E2S Страницы: 5

Бренд: Eaton Страницы: 16

Бренд: Eaton Страницы: 15

Бренд: Major Страницы: 52

Бренд: G-Systems Страницы: 60

Бренд: G-Lab Страницы: 16

Бренд: G&G Страницы: 2

Бренд: Hantek Страницы: 124

Бренд: Hameg Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды