ALLEN & HEATH Qu-16 Скачать руководство пользователя страница 34

Страница: 34 / 92

Qu Mixer Reference Guide

AP9372 iss.9

Insert switches an internal FX in or out if one has been

patched into the mix. The button is disabled when the

insert is not patched. The FX is inserted at the start of

the processing before the EQ.

Use the

FX / Back panel

screen to choose and assign

one of the 4 internal FX as an Insert into a mix.

Groups allow FX or Ducker to be inserted. Using the

Ducker on a Group provides a quick way to set up

multiple channel ducking as well as providing master

processing and control for those channels. The ducker

works in the same way as that described for input

channels above.

GEQ

(graphic equaliser)

The Graphic EQ is a popular tool for tuning out

resonant frequencies in PA systems, for example when

ringing out monitor speakers.

The GEQ allows tonal adjustment of the overall mix

sound. It splits the 20Hz to 20kHz audio frequency

range into 28 standard 1/3 octave bands from 31.5Hz

to 16kHz al/-12dB cut or boost.

Touch the screen In button to switch the GEQ in or

out. Touch a slider to highlight it and use the screen

rotary to cut or boost its frequency. This affects a

small range of frequencies 1/3 octave wide centred on

the frequency marked below the slider. The position of

the sliders shows the approximate shape of the

resulting frequency response curve.

GEQ Fader Flip (Qu-16, 24 and 32)

Press the surface GEQ Fader Flip key to view and

adjust the GEQ on the faders while a mono, stereo or

the LR mix is selected. The screen highlights the active

range of frequencies. Press the switch again to

change range or return to normal mix mode.

The faders toggle between the lower and higher

ranges of frequencies with a useful overlap. The

frequencies are shown on screen and marked on the

panel above the faders.

The fader strip

Sel

key turns on when the slider is at

0dB mid (flat) position while in fader flip mode. Press a

Sel key to return a slider to 0dB.

The strip meters display the RTA of the current PAFL

signal. The dominant frequency (peak band) lights the

red meters. Select the mix PAFL key to view its RTA.

It is better to cut rather than boost frequencies when

tuning speakers using the GEQ.

Group (not available on Qu-16)

Содержание Qu-16





























































































Результаты поиска

Содержание Qu-16

Отзывы:

Похожие инструкции для Qu-16

Бренды по названию

Популярные бренды

ALLEN & HEATH Qu-16, Справочное руководство

Результаты поиска

Содержание Qu-16

Отзывы:

Похожие инструкции для Qu-16

Бренды по названию

Популярные бренды