ALLEN & HEATH Qu-16 Скачать руководство пользователя страница 15

Страница: 15 / 92

Qu Mixer Reference Guide

AP9372 iss.9

4.4

Powering up the mixer

The Qu mixer has an internal universal voltage power supply

unit. This means you can use your mixer in most parts of the

world without the need to modify the unit as long the local

mains supply is within the range:

Mains Voltage =

100 to 240 V.AC

Mains Frequency = 47 to 63Hz



Important

- Before starting, read the Safety Instructions

Sheet packed with the mixer and safety notes printed on the

mixer.

AC MAINS IN

– Standard IEC socket for connecting the

mixer to the local mains supply. Plug in a mains lead with

moulded plug suitable for your territory. A suitable mains

lead is shipped with the mixer.



Do not replace the mains plug or modify the lead in any

way. For your own safety and that of the operator and

performers do not remove or defeat the ground connection.

A cable clamp is provided. You can slot the cable into this

or lock it in place. To lock the cable use a star head Torx

T20 screwdriver to refit the clamp around the cable.

Fuse

– Mains input fuse to protect the mixer circuits in the

unlikely event of a failure or excessive power surge. If you

need to replace the fuse always use one of the same type

and rating as printed on the rear panel. If the replacement

fuse blows then refer to your authorised Allen & Heath

service agent for advice.

Power ON/OFF switch

– Press to switch the mixer

on. Press again to switch it off.

Switching the mixer on

– Press the ON/OFF switch.

The blue Power indicator lights. The mixer takes just a few

seconds to boot up. It restores its previous settings. LR mix

is selected and it’s processing shown on the screen.



To avoid loud thumps, do not switch the mixer on or off

while the PA speakers are powered. Always switch the

amplifiers on last, and switch them off first.

Switching the mixer off

– First select the

Home

screen. Touch

Shut Down

to safely complete processes

such as parameter storing and USB data transfer or

recording. Once complete, press the ON/OFF switch to turn

the mixer off.

Содержание Qu-16





























































































Результаты поиска

Содержание Qu-16

Отзывы:

Похожие инструкции для Qu-16

Бренды по названию

Популярные бренды

ALLEN & HEATH Qu-16, Справочное руководство

Результаты поиска

Содержание Qu-16

Отзывы:

Похожие инструкции для Qu-16

Бренды по названию

Популярные бренды