ALLEN & HEATH Qu-16 Скачать руководство пользователя страница 17

Страница: 17 / 92

Qu Mixer Reference Guide

AP9372 iss.9

Available AudioRacks:

AB168

16 Mic/Line in, 8 Line out - Floor, shelf or rack mount

The AB168 AudioRack can be used as a stage box on the floor or a surface, or mounted in a 19” rack

using the optional rack ears.

AR2412 24 Mic/Line in, 12 Line out - Rack mount

AR84

8 Mic/Line in, 4 Line out - Rack mount

Inputs – Use the

Preamp

screen

key

Source

page

to choose either the local (rear panel) socket or a

remote (dSNAKE) socket for each channel source.

Red buttons show local sources selected, yellow

buttons show dSNAKE sources.

Any dSNAKE input socket can be patched to any

channel using the

Setup / I/O Patch / dSNAKE In

screen. Sockets can be patched to more than one

channel.

The Qu-16, 24, 32 reset default is one-to-one mapping

of local sockets to the channels.

The Qu-Pac and Qu-SB reset default is one-to one

mapping of local sockets to CH1-16, and dSNAKE 1-

16 sockets to CH17-32.



Adding an AudioRack does not expand the number

of Qu channels available.

Outputs – The Qu mixer outputs will appear

simultaneously at its rear panel sockets and also at the

sockets on the remote rack. AudioRack output sockets

are patchable. Qu outputs can be patched to the rack

sockets using the

Setup / I/O Patch / dSNAKE Out

screen.

EXPANDER – To connect to an

AR84 or AB168 to add more

input and output sockets.

MONITOR – To connect to the

Allen & Heath ME personal

mixing system.

dSNAKE – To connect to the

Qu mixer using a Cat5 digital

snake.

EXPANDER – To connect to

the Expander port of the

AR2412, or connect directly to

the Qu mixer via its dSNAKE

port.

EXPANDER – To connect to a

second AB168 to add more

input and output sockets. Also

compatible with the Allen &

Heath ME personal mixing

system.

dSNAKE – To connect to the Qu

mixer using a Cat5 digital snake.

Содержание Qu-16





























































































Результаты поиска

Содержание Qu-16

Отзывы:

Похожие инструкции для Qu-16

Бренды по названию

Популярные бренды

ALLEN & HEATH Qu-16, Справочное руководство

Результаты поиска

Содержание Qu-16

Отзывы:

Похожие инструкции для Qu-16

Бренды по названию

Популярные бренды