ALLDOS KM 255, Руководство по эксплуатации

Страница: 16 / 52

KM 255 en
16 15.720045-V1.0
diaphragm gap (the manometer indicates “0” when the pump is running and when it is
stopped).
If one of these diaphragms breaks, the dosing or hydraulic medium penetrates into the
intermediate gap and, when the ball is removed, into the valve. The system pressure is
therefore impinged on the valve and the contact manometer is activated. Depending on
the design of the system, the electrically isolated reed contact can trigger an alarm device
or the pump can be switched off.
The contact is triggered at the preset pressure as is shown in the table below:
!
Warning
The contact manometer (Ex) in explosion protected version with post switch
should be used if the pump is fitted with a flameproof motor.
4.2 Dimensional Drawing
4.3 Weight
Part number of
manometer Description/Use Set pressure
541-011
for pumps up to10 bar
manometer 0 - 10 bar
1,5 bar
541-011.1
for pumps up to10 bar
flameproof manometer 0 - 10 bar
1,5 bar
Z1
l / l'
d
b
g
j
c
n
k
f
fx
m
mx
h
a
e
k
∅
9mm
Z1 for double pump, motor turned by 180°
fx, mx for double pumps
l for electrical stroke adjustment
l’ or pneumatic stroke adjustment
Dimensions
Type
Dimensions in mm
a b c d e f fx g h j k l l’ n m mx
KM 255 510 492 156 254 228 185 260 126 869 10 253 235 413 180 225 300
Type Dosing Head Material
Weight [kg]
Single / Double pump
KM 255
PVC, PP, PVDF 55 63
1.4571, 2.4610 65 83