HERA LS Series CD/DVD Duplication System / User Manual
41
Loader Processing...
Drive 2<-Input Bin
Input Bin Empty(20)
Reset Hoppers?
Setup
11.DVD+R High Compatibility Mode
DVD+R High Compatibility Mode:
On
DVD+R High Compatibility Mode:
Off
Setup
10.ISRC
ISRC
On
ISRC
Off
“H” indicates the source of the job resides in the Hard Drive.
“4012MB” indicates the capacity of the master disc.
“12%” indicates the current progress of the duplication.
“0” indicates you have made 0 copies so far.
Note:
It is normal to see the progress indicator stay at 0% - 10% and 100% for approximately 30 seconds
for CD duplication and up to one minute for DVD duplication. That is caused by the initializing and
finalizing stages.
Once the duplication run is completed, the loader will remove the disc from the drive and will place either the
successful copy on the output spindle or the bad copy in the reject area.
The loader will then pick up another blank disc and load it into the drive. This is then repeated for each drive.
The copying process will continue until you run out of blank discs.
At this point you can either load more discs on to the input spindle(s)
and press the
Enter
button to continue, or press the
ESC
button to
terminate your project.
13.10 ISRC
This option will allow you to enable/disable copying ISRC code of the Audio CD. ISRC is the serial
number of the audio tracks that uniquely identifies the song in that audio track. This ISRC code is
commonly found in commercial Audio CDs and rarely seen on the home made Audio CDs. By enabling
this feature, the duplication performance will be lowered.
Use the
Up or Down
button to select the
ISRC
menu and press the
ENT/Enter
button to enter that
menu.
Use the
Up or Down
button to select whether the
ISRC
is ON or OFF, and press the
ENT/Enter
but-
ton to select that option
13.11 DVD+R High Compatibility Mode
This feature allows you to turn the DVD+R High Compatibility Mode feature ON or OFF. The purpose of this
feature is to increase the compatibility of DVD+R media with a broader range of DVD Video players. This
process will increase the amount of time required to duplicate your disc(s).
Use the
Up or
Down
button to select the
DVD+R
High Compatibility Mode
menu and press the
Enter
button to enter that menu.
