Alkin W32 Canopy, Инструкция и список запасных частей

Страница: 32 / 121

W 3 2 S E R I E S
H I G H P R E S S U R E B R E A T H I N G A I R C O M P R E S S O R
©ALKIN COMPRESSORS
32
1.8.2 Drain Controls
W32 Series compressor can be drained by 2 different drain controls.
I. Manual Drain
W32 Mariner models are manually drained by openning the manual drain valves periodically (every 7 minutes)
located at the bottom of the water seperators, and the purifier on the compressor. Water Condensate and oil
collected inside the water seperators and purifier is removed by this way. It is the standard drain control on all W32
Mariner compressors if otherwise mentionned.
II. Automatic Drain
W32 Series compressors can be automatically drained by automatic drain valves. These drain valves are controlled
by 3 way Solenoid Valve which is normally closed. This solenoid valve supplies or cuts the control air on the
drain valves, thus letting them to open or close. The solenoid valve itself is controlled by a timer installed in the
electrical
panel. The dual time adjustment on this timer allows to adjust the time period (t1~7 min) which
the solenoid will remain energised (=the drain valve will remain closed), and the duration( t2 ~ 6 seconds) during
which the solenoid will be de-energised (=the drain valve will open and perform the drain function). Drain timers
where the period and duration of automatic drain is adjusted shown below:
Note
Automatic Drain is standard on all W32 Canopy models. It could be adapted to W32 Mariner Electric
models as an optional feature while it is not applicable to W32 Mariner compressors driven by petrol
engine.
Important !
Do not change the factory settings of the drain times and durations. Consult the factory if you need to
change the settings.
1.9 Technical Specifications and User Records
PLEASE COMPLETE MISSING INFORMATION ON THE TABLES BELOW ACCORDING TO THE
LABELS AND TECHNICAL SPECIFICATIONS OF THE UNIT YOU OWN AND KEEP THE TABLES
FOR FUTURE REFERANCE.