Alienware Area-51 Threadripper Edition R7, Руководство по обслуживанию

Страница: 120 / 140

Replacing the base panel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer . After working inside your computer, follow the instructions
in After working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Procedure
1 Align the tabs from inside the chassis on the right side and left side, securing the base panel to the chassis and snap it in
place.
2 Replace the two screws (#6-32x6) from inside, securing the base panel to the right side of the chassis.
3 Replace the three screws (#6-32x6) from inside, securing the base panel to the left side of the chassis.
4 Replace the four screws (#6-32x6) that secure the base panel to the chassis.
Post-requisites
1 Replace the hard drive (HDD1).
2 Replace the battery case .
3 Replace the left and right side-panels. See “ Replacing the side panels ”.
4 Replace the stability foot .
120