Advanced
Deep Sleep Control
Allows you to define the controls when Deep Sleep is enabled.
Default: Enabled in S5 Only.
Auto Power On
Enable to set the computer to turn on automatically every day
or on a preselected date and time. This option can be
configured only if the Auto On Time is set to Everyday,
Weekdays, or Selected Days.
Default: Disabled.
Numlock Key
Enable or disable Numlock.
Default: Enable Numlock.
Table 5. System setup options—OC menu
OC
AMD CPU
Allows you to set OC mode and Custom Pstate0 for the
CPU.
AMD Memory
Allows you to set the overclocking and adjust MEM
VDDIO,
Table 6. System setup options—Security menu
Security
Unlock Setup
Displays if the setup status is unlocked.
Admin Password
Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password
Allows you to set the system password. The system
password controls access to the computer at boot.
HDD Password Status
Displays if the HDD password is clear or set.
Default: Not set.
HDD1 Password Status
Displays if the HDD password is clear or set.
Default: Not set.
HDD2 Password Status
Displays if the HDD password is clear or set.
Default: Not set.
HDD3 Password Status
Displays if the HDD password is clear or set.
Default: Not set.
Password Change
Allows you to permit or deny system password or HDD
password changes. Default: Permitted
Computrace
Enable or disable the BIOS module interface of the
optional Computrace Service from Absolute Software.
HDD protection
Allows you to set, change, or delete the hard-disk drive
password.
Default: Disabled.
Firmware TPM
Enable or disable the firmware TPM.
Default: Enabled.
UEFI Firmware Capsule Updates
Enable or disable BIOS updates through UEFI capsule
update packages.
Default: Enabled.
135
Содержание Area-51 Threadripper Edition R7
