Main
Discrete Graphics 1
Displays the first discrete graphics installed on your
computer.
Discrete Graphics 2
Displays the second discrete graphics installed on your
computer.
Discrete Graphics 3
Displays the third discrete graphics installed on your
computer.
Device Information
First HDD
Displays the first HDD device information.
SATA ODD
Displays the SATA ODD device information.
Second HDD
Displays the second HDD device information.
mSATA Device
Displays the mSATA device information.
M.2 PCIe SSD
Displays the M.2 PCIe SSD device information.
System Date
Displays the current date in mm/dd/yyyy format.
System Time
Displays the current time in hh:mm:ss format.
Table 4. System setup options—Advanced menu
Advanced
Advanced BIOS Features
BIOS Recovery via Hard Drive
Allows you to store the recovery image file on the primary hard
drive. Default: Enabled.
BIOS Auto-Recovery
Enable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive.
Default: Enabled
Always Perform Integrity Check
Allows you to perform the Integrity check. Default: Enabled
Integrated Devices
Front USB Ports
Allows you to enable or disable the front USB ports. Default:
Disabled.
Rear USB Ports
Allows you to enable or disable the rear USB ports. Default:
Disabled.
HD Audio
Allows you to enable or disable the integrated audio controller.
Default: Enabled.
Integrated NIC1/Wireless LAN
Allows you to enable or disable the NIC1. Default: Enabled.
Integrated NIC2
Allows you to enable or disable the NIC2. Default: Enabled.
Pxe Option
Allows you to enable or disable the boot option for legacy
network devices. Default: Disabled.
SATA Operation
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
PCIE GEN3
Allows you to enable or disable the PCIE GEN3. Default:
Enabled.
Power Management Setup
AC Recovery
Sets what action the computer takes when power is restored.
Default: Last State.
134
Содержание Area-51 Threadripper Edition R7
