Alienware Area-51 Threadripper Edition R7, Руководство по обслуживанию

Страница: 112 / 140

Removing the rear bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer . After working inside your computer, follow the instructions
in After working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the side panels ”.
3 Follow the procedure from step 1 to step 3 in Removing the handle bars to remove the rear handle bar.
Procedure
1 Disconnect the rear I/O accessibility lighting cable from the I/O board.
2 Open the securing clip which secures the rear I/O accessibility lighting cable to the chassis.
3 Remove the rear I/O accessibility lighting cable through the routing guides on the chassis.
4 Remove the rear I/O accessibility lighting cable through the slot on the chassis.
112