Alien Technology ALR-8780, Инструкция по интерфейсу

Страница: 10 / 104

I
NTRODUCTION
C
HAPTER
1
R
EADER
I
NTERFACE
G
UIDE
D
OC
. C
ONTROL
# 8101938-000 R
EV
05
2
External files and documents are referenced in italic text .
Specific characters and commands to be typed are shown within
quotation marks, and/or in
fixed-width font. Example: At the prompt
type “ set DHCP=ON ”.
Values to be provided and typed in by the user are shown within
brackets in upper and lowercase. Example: At the prompt type “
set
IPaddress=[IP address value] ” or “ set
IPaddress=xxx.xxx.xxx.xxx ”. The actual command typed in
would appear as: “ set IPaddress=10.1.60.5 ”.
Blocks of sample code or commands appear:
indented, in a fixed-width serif font.
Keys to be pressed are shown in brackets and all caps. Example: Press
the [ENTER] key.
Upon entering any command instruction, you must press [ENTER] to
send the command.
RFID Reader commands are not case sensitive. Although, for clarity, the
commands may be shown in upper and lower case in this document, you
may type them in all lowercase characters, if you prefer.
A space is required between the command (verb) such as “get” or “set”
and the specific parameters, as in the example “
get IPaddress
.”
However, no space is required between the parameter elements such as
“IP” and “address.”
Requirements
In order to fully interface with the RFID Reader you will need the following:
a PC running Windows 98 or higher, with CD-ROM drive and an
available RS-232 serial port
standard 120 VAC power
host software (Alien demo software or your own custom software)
RFID Tags (AIDC Class I compliant)
Serial communication requires:
a text-based serial communications program (such as HyperTerminal)
running on any computer
Ethernet communication requires:
an Ethernet network
a Telnet communication program