25
DESCRIPTION AMTE250
The AMTE250 was developed and optimised for ergonomic, effective and time-saving assembly and wiring of
mounting panels.
The assembly table is put into a horizontal position for marking, drilling, thread cutting, channel and rail
fitting. The operator can adjust the assembly table himself to achieve the optimum ergonomic work position
for the fitting of structural components, for labelling and wiring. For this purpose the hub or tilt is brought
into the required position by means of the battery driven electric motors.
Quick release clamps or cam action plungers can be used to fix mounting panels. Experience has shown that
plungers are better than clamps when fixing mounting panels with U-shaped edges, as quick release clamps
often interfere with a cable channels or structural components on the upper surface of the panel. The cam
action plunger fixes the mounting panel at the keyway and the whole surface can be fitted unimpeded.
The table has four swivel castors, which are fully lockable and allow the applied mounting panel to be
moved between workstations.
The AMTE250 accommodates mounting panels with a width of up to 1100 mm and a length of 1900 mm at
a maximum bearing load of 250 kg. The height adjustable loading surface allows seated work when dealing
with smaller mounting panels.
