IN CASE O
F EM
ERGENCY
236
12. Lift the extension lever on the wrench.
Jacking Location
13. Rotate the extension lever clockwise until
the round pin on the jack engages in the
hole in the lifting block located about
6 inches (15 cm) from the outside edge of
the body. The lifting points are marked by
triangles
visible on the plastic body
panel.
Jacking Point Indicators
14. Raise the vehicle by turning the jack screw
clockwise, using the swivel wrench. Raise
the vehicle only until the tire just clears the
surface and enough clearance is obtained
to install the compact spare tire. Minimum
tire lift provides maximum stability.
15. Remove the five wheel bolts and take the
wheel off.
16. Make sure the contact surfaces between
compact spare tire and hub are clean so
that the fastening bolts will not come
loose.
17. Fit the compact spare tire by inserting the
first wheel bolt for two threads into the
hole closest to the valve.
2 — Extension Lever
3 — Wrench Head
4 — Jack
5 — Lifting Block
CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those
indicated in the Jacking Instructions for this
vehicle.
WARNING!
Raising the vehicle higher than necessary
can make the vehicle less stable. It could
slip off the jack and hurt someone near it.
Raise the vehicle only enough to remove the
tire.
CAUTION!
Be sure to mount the spare tire with the
valve stem facing outward. The vehicle
could be damaged if the spare tire is
mounted incorrectly.
20_GU_OM_EN_USC_t.book Page 236