235
Conditions Of Non-Use Of The Jack
Temperatures below −40°F (−40°C).
On sandy or muddy ground
On uneven ground
On steep slopes in extreme weather condi
-
tions.
In direct contact with the engine or for
repairs under the vehicle
On boats
Changing Procedure
1. Park the vehicle on a firm, level surface.
Avoid ice or slippery areas.
2. Turn on the Hazard Warning Flashers.
3. Apply the electric park brake.
4. Place the gear selector into PARK (P).
5. Place the ignition in the OFF mode.
6. Block both the front and rear of the wheel
diagonally opposite of the jacking position.
For example, if changing the right front
tire, block the left rear wheel.
Wheels Blocked
7. Open the liftgate and lift up the load floor
using the handle.
8. Take the warning triangle and position it at
a suitable distance from the vehicle to
warn oncoming vehicles.
9. Unscrew the locking plate and take out the
compact spare tire and the air
compressor.
Compact Spare Tire — If Equipped
10. Remove the damaged wheel by using the
wheel wrench to loosen the bolts by one
turn.
11. Position the jack under the vehicle, near
the wheel to be changed, taking care not
to damage the plastic body panel.
WARNING!
Do not attempt to change a tire on the side
of the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
1 — Locking Plate
20_GU_OM_EN_USC_t.book Page 235
