Alfa Romeo 4C 2016 Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 369

Alfa Romeo 4C 2016 Скачать руководство пользователя страница 90

WARNING!

(Continued)

•

Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious
injury or death could result from a poorly adjusted
seat belt.

•

Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt,
which could result in serious injury or death.

Non-Adjustable Head Restraints

The non-adjustable head restraints are form fitted into
the upper structure of the seatback and are designed to
reduce the risk of injury by restricting head movement in
the event of a rear impact. The seatback should be
properly adjusted to an upright position where the head
restraint is positioned as close as possible to the back of
your head.

WARNING!

Be certain that the seatback is locked securely into
position. Otherwise, the seat will not provide the
proper stability for passengers. An improperly
latched seatback could cause serious injury.

TO OPEN AND CLOSE THE DECKLID

CAUTION!

•

To prevent possible damage, do not slam the deck-
lid to close it. Use a firm downward push at the
center of the decklid to ensure the decklid latch is
fully engaged.

•

During normal vehicle operation, the luggage com-
partment (located rear of the engine) can reach
temperatures above 149 degrees. Do not transport

(Continued)

88

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
88
89
90
91
92
...
»

Содержание 4C 2016


















































































































































































































































































































































































Отзывы:

Нет отзывов