Alfa Romeo 4C 2016 Скачать руководство пользователя страница 244 | Manualshive

Страница: 244 / 369

Alfa Romeo 4C 2016 Скачать руководство пользователя страница 244

TRAILER TOWING

Trailer towing with this vehicle is not recommended.

RECREATIONAL TOWING (BEHIND
MOTORHOME, ETC.)

Towing This Vehicle Behind Another Vehicle

NOTE:

This vehicle may be towed on a flatbed or

vehicle trailer provided all four wheels are

OFF

the

ground.

CAUTION!

•

DO NOT flat tow this vehicle. Damage to the
drivetrain will result.

•

Do not dolly tow this vehicle. Use of a towing dolly
can cause significant damage to your vehicle. Dam-
age from improper towing is not covered under the
New Vehicle Limited Warranty.

•

Towing this vehicle in violation of the above re-
quirements can cause severe transmission damage.
Damage from improper towing is not covered un-
der the New Vehicle Limited Warranty.

242

STARTING AND OPERATING

«
...
242
243
244
245
246
...
»

Содержание 4C 2016


















































































































































































































































































































































































Отзывы:

Нет отзывов