Alfa Romeo 4C 2016 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 369

Alfa Romeo 4C 2016 Скачать руководство пользователя страница 31

Raise the decklid and release supporting rod from its
locking device.

Insert the end of the rod in housing, making sure that the
rod engages in the smallest hole of the retaining clip.
Care must be taken to keep the decklid raised until the
rod is fixed in the correct position.

NOTE:

Maintain a tight grip on the decklid when raising,

in order to prevent any external occurrence (e.g. a gust of
wind) from suddenly opening the decklid to end of
travel. Additionally, in order to prevent any damage to
the vehicle or broken windows, do not force the decklid
beyond the opening position necessary to secure the
supporting rod in the hole of the retaining clip.

Closing Procedure

1. Hold the decklid up with one hand and use the other

to remove rod from housing and reinsert it in its
locking device.

2. Lower the decklid approximately 7.8 inches (20 cm)

from the engine compartment and let it drop. Make

Decklid Release Lever Location

1 — Decklid Release Lever

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

29

«
...
29
30
31
32
33
...
»

Содержание 4C 2016


















































































































































































































































































































































































Отзывы:

Нет отзывов