Alfa Romeo 4C 2016 Скачать руководство пользователя страница 137

Страница: 137 / 369

Yellow Telltale

Light

What It Means

greater than 30 MPH (48 km/h), see your authorized dealer as soon as possible to have the
problem diagnosed and corrected.

•

The “ESC Off Indicator Light” and the “ESC Indicator Light” come on momentarily each
time the ignition switch is turned to ON/RUN.

•

Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was
turned off previously.

•

The ESC system will make buzzing or clicking sounds when it is active. This is normal;
the sounds will stop when ESC becomes inactive.

•

This light will come on when the vehicle is in an ESC event.

UNDERSTANDING YOUR INSTRUMENT PANEL

135

Содержание 4C 2016

















































































































































































































































































































































































Результаты поиска

Содержание 4C 2016

Отзывы:

Alfa Romeo 4C 2016, Руководство пользователя, Страница: 137 / 369

Результаты поиска

Содержание 4C 2016

Отзывы: