Alfa Romeo 4C 2016 Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 369

Alfa Romeo 4C 2016 Скачать руководство пользователя страница 89

Recliner Adjustment

The recliner lever is located on the outboard side of the
seat. To recline the seat, lean forward slightly, pull the
recliner lever upward, lean backward until the seat is in
the desired position, and release the lever. To return the
seat to its full upright position, lean forward, pull the
recliner lever upward and hold it until the seat returns to
its full upright position.

WARNING!

•

Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collision and serious
injury or death.

(Continued)

Recline Lever

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

87

«
...
87
88
89
90
91
...
»

Содержание 4C 2016


















































































































































































































































































































































































Отзывы:

Нет отзывов