Alfa Romeo 4C 2016 страница 280 Скачать руководство пользователя

Страница: 280 / 369

2. Turn the ignition to the MAR-ON position then to

STOP.

3. After turning the ignition to the STOP, within two

minutes move the right stalk upward, into the un-
stable (“anti-panic”) position, for at least half of a

second. The windshield wiper then executes part of a
stroke; at each command, approximately 1/3 of a
normal wiper stroke is triggered.

NOTE:

The previous operation can be repeated up to

three times. In order to move the blades to the most
suitable position.

4. Lift the blade from the windshield and proceed with

the required operation.

5. Carefully lower the blade, bringing it back in contact

with the windshield.

6. Bring the blade to the initial rest position, turning the

ignition to MAR-ON.

NOTE:

Do not operate the screen wiper with the blades

lifted from the windshield.

Windshield Wiper/Washer Lever

278

MAINTAINING YOUR VEHICLE

Содержание 4C 2016

















































































































































































































































































































































































Результаты поиска

Содержание 4C 2016

Отзывы:

Похожие инструкции для 4C 2016

Бренды по названию

Популярные бренды

Alfa Romeo 4C 2016, Руководство пользователя

Результаты поиска

Содержание 4C 2016

Отзывы:

Похожие инструкции для 4C 2016

Бренды по названию

Популярные бренды