Alfa Romeo 4C 2016 Скачать руководство пользователя страница 148

Страница: 148 / 369

3. Briefly push the

SET/BACK

button to store the new

setting and go back to the main menu option previ-
ously selected.

Selecting An Option Of The Main Menu With Sub-
menu

1. Briefly push the

SET/BACK

button to display the first

submenu option.

2. Push the

DOWN

arrow button (by a

single push) to scroll through all the submenu
options.

3. Briefly push the

SET/BACK

button to select the dis-

played submenu option and to open the relevant setup
menu.

4. Push the

DOWN

arrow button (by a

single push) to select the new setting for this
submenu option.

5. Briefly push the

SET/BACK

button to store the new

setting and go back to the previously selected sub-
menu option.

6. Push and hold the

SET/BACK

button to return to the

main menu (short hold) or the main screen (longer
hold).

Speed Buzzer (Speed Limit)

With this function, it is possible to set the vehicle speed
limit (MPH or km/h) to immediately alert the driver
when the set limit is exceeded.

To set the speed limit, proceed as follows:

1. Briefly push the

SET/BACK

button. The display will

show the message (Speed Buzzer).

2. Push and release the

DOWN

arrow

button to select speed limit activation (On) or
deactivation (Off).

146

UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 4C 2016

















































































































































































































































































































































































Результаты поиска

Содержание 4C 2016

Отзывы:

Alfa Romeo 4C 2016, Руководство пользователя, Страница: 148 / 369

Результаты поиска

Содержание 4C 2016

Отзывы: