1
PURPOSE OF THIS MANUAL
The purpose of this Manual is to instruct the user how to take all necessary safety measures and ensure that all necessary
actions that will guarantee the proper and safe use of this heating device will be undertaken.
UPDATES
This Manual takes into account all the advanced technologies that existed at the time this pellet boiler was placed on
the market.
This Manual does not take into account the boiler s already on the market with appropriate technical documents and
which may not be considered faulty or inadequate after any modifications, adaptations or application of new technologies to
newly launched products.
This booklet should be read and studied carefully. All information provided in this booklet should be considered
necessary for the proper installation, use and maintenance of your boiler .
This Manual should be kept in a safe place. This Installation, Operation and Maintenance Manual is considered to be
an integral part of the pellet boiler .
If the boiler is resold to another person, the new owner must also be given this Manual.
If you lose this booklet, you can ask the manufacturer or authorized seller for a new one.
RESPONSIBILITY OF THE MANUFACTURER
By delivering this manual, “Alfa Plam JSC” shall not accept any legal or criminal liability, either direct or indirect, for:
Accidents and/or damage occurred due to the non-observance of the standards and specifications stated in this Manual,
Accidents and/or damage occurred due to the improper operation or use of the boiler by the user,
Accidents and/or damage occurred due to any modifications and repairs not approved by “Alfa Plam JSC”,
Poor maintenance,
Unpredictable events,
Accidents and/or damage occurred due to the use of spare parts that are not original spare parts or inappropriate.
The installer of the boiler shall take the full responsibility for the installation.
REQUIRED GENERAL STANDARDS
The boiler user must be an adult and responsible person.
Make sure that children do not approach the boiler while in operation, with the intention of playing.
Children must not approach the boiler while in operation with the intention of playing. This appliance can be used by
children aged 8 and older and persons with reduced physical, sensory or mental abilities, if they are supervised by an adult
who is familiar with the instructions for use. Boiler cleaning and maintenance cannot be performed by children without the
supervision of an adult.
HARMONIZED STANDARDS
- EN 303-5;
- EN 50581;
- EN 61000-6-2;
- EN 61000-6-3;
- EN 60335-1;
- EN 60335-2-102;
- EN 62233;
- Commission Regulation (EU) 2015/1189.
TRANSPORTING AND MOVING THE PELLET BOILER
When moving the boiler , take care of your own safety.
Before transporting and moving the pellet boiler , which must be carried out absolutely safely, ensure that the forklift
truck has a carrying capacity sufficient for lifting the boiler . Avoid sudden movements and /or improvised ways to move the
boiler . Lifting, moving and repositioning your boiler can be carried out by means of rod-like boiler supports that have a thread
at one end. These supports (4 pieces) are wound up to the designated places on both sides of the boiler (Figure 1). This activity
should be carried out by 4 people. Boiler supports are delivered with the boiler !
Note:
When moving the device, it should be taken into account that it is much heavier in its front part because the boiler itself is located
in that part of the device!
ALL THE PACKAGING MATERIAL SHOULD BE REMOVED AWAY FROM THE REACH OF CHILDREN. THE MATERIALS
CONTAINED IN THE PACKAGING (BAGS, FILMS, POLYSTYRENE, ETC.) MAY CAUSE SUFFOCATION.
RESPONSIBILITY OF THE INSTALLER
The installer is responsible to check if the installation and the air supply function properly and if all the requirements
required for the installation of the pellet boiler have been fulfilled.
The installer is to ensure that the boiler is in compliance with local regulations applicable in the place where the boiler is
installed.
The boiler must be used in accordance with the instructions given in this Installation, Operation and Maintenance Manual,
as well as with all the safety standards prescribed by local legal regulations applicable in the place where the boiler is
installed.
The installer’s obligations are defined by the SRPS 10683 Standard. The installer must verify:
The type of the boiler that is being installed,
