17
Press the P4 and P6 keys to select the desired menu or submenu. Then press the P3 key to enter the desired menu or
submenu.
To increase or decrease the parameter value press the P4 or P6 keys. Press the P3 key to save the new parameter set
value. To cancel all modifications and return to the old values, press the P1 key.
After the parameter value has been changed, the new value is sent to the main controller.
If the transfer has not been successful, the following message appears on the display:
In this case, it is necessary to do settings once again.
The User Menu contains more menus and submenus. By pressing the P3 key you enter the User Menu and the following
list of submenus is shown:
Menu
Description
Combustion Management
Menu for modifying combustion power, calibration of the auger motor and
the flue gas motor
Heating Management
Menu for modifying the set water temperature value in the boiler , buffer
and other heating parameters.
Chrono
Menu for selecting modality of the Chrono Program and boiler turn on/off
time
Manual Load
Menu for manual loading of the auger. It is only feasible when the system
is in the OFF state
Time and Date
Time and date setup menu
Remote Control
Remote Control Activation Menu
Language
Change language menu on the control panel
Keyboard Menu
Menu for setting the contrast and brightness of the LCD panel
System Menu
Technical Settings Menu
Combustion Management Menu
This is a menu for setting the parameters that determine the combustion in the furnace. It contains several submenus. By
pressing the P3 key you get into menu and you can see the following submenus:
10.3.1.1 Combustion Power
This menu is used for setting the system's combustion power in manual or automatic mode (if available). In manual mode,
the user can adjust the desired combustion power by himself/herself.
Combustion
Description
1-5 (Combustion power 1, 2, 3, 4 and 5)
The power is adjusted manually by selecting Power 1, 2, 3, 4, or 5.
Auto (option not active)
The power is adjusted automatically by the system
By pressing the P3 key you enter the Combustion Power Menu
