Alfa Laval Toftejorg MultiJet 65 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 56

background image

6 Maintenance

MultiJet 65

6.3

Top assembly

Disassembly

1. Remove Locking wire.
2. Remove Screws (pos. 34). Loosen with Key (tool No. TE135) and unscrew with Screwdriver (tool No. TE135A) through

holes in the Flange.

3. Lift off Flange (pos. 1).
4. Remove Screw (pos. 17), Spring washer (pos. 16) and Washer (pos. 18). To secure Impeller against rotation, insert carefully

Screwdriver (tool No. TE135A), through Impeller (pos. 4) into a hole in the Stem.

5. Pull off Impeller (pos. 4).

Reassembly
1. Reinstall Impeller (pos. 4). Make sure that Impeller is correctly rotated to be pushed onto Turbine shaft. Do not try to hammer

Impeller in position, as this will damage Slide bearing under Turbine shaft.

2. Mount Washer (pos. 18), Spring washer (pos. 16) and Screw (pos. 17) and tighten. To secure Impeller against rotation insert

carefully Screwdriver (tool No. TE135A) through Impeller (pos. 4) into a hole in the Stem.

3. Mount Flange (pos. 1). Rotate Flange to align holes in Flange and Stem.
4. Mount Screws (pos. 34) with Screwdriver (tool No. TE135A) through holes in the Flange. Tighten with Key (tool No. TE135).
5. Secure with Locking wire (pos 19).

22

«
...
20
21
22
23
24
...
»

Содержание Toftejorg MultiJet 65

























































Отзывы:

Нет отзывов

Похожие инструкции для Toftejorg MultiJet 65

Бренд: XAG Страницы: 24

Бренд: BACtrack Страницы: 13

Бренд: TA Instruments Страницы: 35

Бренд: Rangevision Страницы: 28

Бренд: Naked Страницы: 36

Бренд: XFit Страницы: 16

BlackBox Series

Бренд: Nakamichi Страницы: 23

Бренд: Harken Страницы: 4

Бренд: A&D Страницы: 33

Бренд: SAC Страницы: 2

EPL-HB-150LED-RT-IBSC

Бренд: Larson Electronics Страницы: 2

Бренд: Pfeuffer Страницы: 32

Бренд: WATSON INDUSTRIES Страницы: 17

TRAKTOR KONTROL S3

Бренд: Native Instruments Страницы: 39

Бренд: K-SPORT Страницы: 4

Бренд: Baldan Страницы: 72

Бренд: Avicenum Страницы: 32

Бренд: Renegade Labs Страницы: 114

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды