Alfa Laval Toftejorg MultiJet 65, Инструкция по эксплуатации

Страница: 20 / 56

6 Maintenance
MultiJet 65
6.1 Service and repair of ATEX/IECEx certified machines
All service and repair of ATEX/IECEx certified machines can be performed by Alfa Laval Kolding A/S, Denmark,
or by an Alfa Laval service center approved by Alfa Laval Kolding A/S.
Changes to the machine are not allowed without approval by the person responsible for the ATEX/IECEx
certification at Alfa Laval. If changes are made – or spare parts other than Alfa Laval original spare parts are used
- the EC Type Examination certification (the ATEX/IECEx Directive) is no longer valid.
In order to ensure compliance with the ATEX/IECEx regulations and keep the machine ATEX/IECEx certification
valid, the service or repair must be performed by an authorized person with knowledge of the ATEX/IECEx
requirements and regulations. All spare parts must be original Alfa Laval spare parts and the repair or service
must be done according to the instructions in this manual.
Warning:
If a customer wishes to carry out service or repair himself, it is the responsibility of the repair shop to ensure that
the ATEX/IECEx requirements are met in any way possible. After performing service or repair, the repair shop
thus carries the full responsibility for traceability of all relevant documents in order to ensuring the retention of the
ATEX/IECEx certification of the machine.
20