6 Maintenance
MultiJet 65
6.2
Preventive maintenance
In order to keep your tank cleaning machine servicing you as an efficient tool in your tank cleaning operations, it is essential to
maintain its high performance by following a simple preventive maintenance programme, which will always keep your tank
cleaning machine in good condition.
Good maintenance is careful and regular attention!
The following recommended preventive maintenance is based on tank cleaning machines working in average conditions.
However, you will appreciate that a tank cleaning machine, which has a rough and dirty job to do, will need more frequent
attention than one working in ideal conditions. We trust that you will adjust your maintenance programme to suit.
-
Always read the instruction and maintenance manuals before undertaking the service.
-
Some kits contain a small quantity of parts not needed for each tank cleaning machine model. These are not included in
the price and may be disregarded.
-
Always replace all parts included in the Service Kit.
Always use only proper tools. Use standard tool kit. Never force, hammer or pry components together or apart. Always
perform all assembly/disassembly steps in the order described in this manual.
Never assemble components without previous cleaning. This is especially important at all mating surfaces. Work in a
clear well lighted work area.
Note: Recommended tightening torque for all screws: 4-5 Nm.
1. Disassemble machine as described on the following pages.
2. Clean material build-up and deposits from internal parts with Scotchbrite, S-Ultrafine, eventually chemical cleaner and
fine abrasive cloth.
3. Assemble machines as described in the following pages.
4. Check that the machine is in operating condition by inserting 3/16" hex Screw-driver (tool No. TE134A) in screw in top of
Turbine shaft and easily turn Turbine shaft clockwise. If any resistance is recognized, the machine should be disassembled to
localize the cause.
21
Содержание Toftejorg MultiJet 65
