[email protected]
Movil:959440045
93
6 Dismantling/Assembly
6.3 Assembly
6.3
Assembly
Clean all parts in a degreasing agent and replace
parts supplied in the Spare parts kits.
✔
Check
point
‘‘5.3.1 Corrosion” on page 54
,
‘‘5.3.2 Erosion” on page 56
,
‘‘5.3.3 Cracks” on page 57
,
‘‘5.3.11 Top bearing springs” on page 64
,
‘‘5.3.12 Ball bearing housing” on page 64
,
‘‘5.3.13 Worm wheel and worm; wear of
teeth” on page 65
.
6.3.1
Vertical driving device
Before assembling the bowl spindle, make sure
the relevant checks have been carried out.
Wipe off and oil the bearing seat before fitting the
ball bearing.
Inspect the tapered end of the bowl spindle and
assemble ball bearings.
Heat the new ball bearings in oil to maximum
125 °C.
1.
Fit the bearing onto the shaft.
NOTE
Always fit new bearings.
CAUTION
Burn hazards
Use protective gloves when handling the
heated bearings.
G
0597
321
G
059
7411
www.fdm.com.pe
Содержание 881145-09-01/7
