210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free)
MODEL No.: SHW196 • 06/2019 9885
e-mail: [email protected]
AUS
35
1300 889 028
AUS
Working with detergents (see fig. S1, S2 )
Detergents can only be applied with the black detergent nozzle
(2) ( Soap spray ).Mix the detergent with water based on the
recommendation ratio of the manufacturer of your purchased
detergent.
1) Install the black detergent nozzle (2) for detergent application at
low pressure.
2) Remove the detergent tank cap (13) and fill the detergent tank with
soap detergent.
NOTE: Do not pull too hard when removing the tank cap (13), or
the small hose connected with the tank may be fractured.
3) With the engine running, squeeze the trigger switch for spray gun
(41) to operate.
4) Apply detergent to work area. Do not allow detergent to dry on the
surface.
5) Always flush the detergent bottle with fresh water when the
cleaning job is done, to rinse/flush any remaining detergents from
the injection system.
WARNING:
Never use:
- Bleach, chlorine products or other corrosive chemicals.
- Liquids containing solvents (i.e., paint thinners, petrol, oils.)
- Tri-sodium phosphate products.
- Ammonia products.
- Acid-based products.
S2
S1
Содержание Workzone titanium SHW196
Страница 54: ...This page is blank ...
Страница 55: ...This page is blank ...