ALDI Workzone titanium SHW196 Скачать руководство пользователя

Страница: 12 / 56

Safety Warnings for battery pack

a) Do not dismantle, open or shred cells or battery pack.

b) Do not short-circuit a battery pack. Do not store battery

packs haphazardly in a box or drawer where they may

short-circuit each other or be short-circuited by conductive

materials.

When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws or other small

metal objects, that can make a connection from one terminal to

another. Shorting the battery terminals together may cause burns or

a fire.

c) Do not expose battery pack to heat or fire. Avoid storage in

direct sunlight.

d) Do not subject battery pack to mechanical shock.

e) In the event of battery leaking, do not allow the liquid to

come into contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of water

and seek medical advice.

f) Seek medical advice immediately if a cell or battery pack has

been swallowed.

g) Keep battery pack clean and dry.

h) Wipe the battery pack terminals with a clean dry cloth if they

become dirty.

i) Battery pack needs to be charged before use. Always refer to

this instruction and use the correct charging procedure.

j) Do not maintain battery pack on charge when not in use.

k) After extended periods of storage, it may be necessary

to charge and discharge the battery pack several times to

obtain maximum performance.

l) Battery pack gives its best performance when it is operated

Safety notes for battery

Содержание Workzone titanium SHW196

























































Результаты поиска

Содержание Workzone titanium SHW196

Отзывы:

Похожие инструкции для Workzone titanium SHW196

Бренды по названию

Популярные бренды

ALDI Workzone titanium SHW196, Руководство пользователя

Результаты поиска

Содержание Workzone titanium SHW196

Отзывы:

Похожие инструкции для Workzone titanium SHW196

Бренды по названию

Популярные бренды