manualshive.com logo in svg

ALDI Workzone titanium SHW196, Руководство пользователя

Поделиться
Скачать
ALDI Workzone titanium SHW196 Скачать руководство пользователя страница 32

210cc 4 stroke Petrol High Pressure Washer

AFTER SALES SUPPORT

(toll free)

MODEL No.: SHW196 • 06/2019 9885

e-mail: [email protected]

AUS

30

 1300 889 028

AUS

 NOTE:

 Sometimes the choke lever (28) needs to be moved to the  

middle position as required.

4)  Turn the fuel valve (29) to the right. Be sure to move it to the end.

5)  Turn the throttle lever (30) a little to the left. 

6)  Push the spray gun safety lock (44) to release the trigger switch (41). 

Squeeze the trigger switch (41) on spray gun (19) to release pressure.

  Note: Do not install the nozzle when starting the machine. 

Refer to Installing a nozzle (2) to the gun (19) to see when 

and how to install the nozzle.

7)  Insert the electric start key (32) into the keyhole on the electric start 

panel. Turn the key (32) to right to the “START” position. The engine 

will start. 

8)  After the engine starts, the start key (32) will turn back to “RUN” 

position automatically. Turn the choke lever (28) a little to the right. 

Move to about 1/3 position. Then slowly move the choke lever (28) to 

the right during the engine heating process.

9)  During use, turn the throttle lever (30) to left or right as required to 

adjust the flowing speed.

 

P1 

N3

N5

N4

N1

N2

Содержание Workzone titanium SHW196

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды