ALDI Workzone titanium SHW196 страница 17 Скачать руководство пользователя

Страница: 17 / 56

210cc 4 stroke Petrol High Pressure Washer

AFTER SALES SUPPORT

(toll free)

MODEL No.: SHW196 • 06/2019 9885

e-mail: [email protected]

AUS

1300 889 028

AUS

WARNING: Always wear safety goggles or safety glasses

with side shields during operation. Failure to do so could

result in objects being thrown into your eyes causing possible

serious injury.

WARNING: Always stop the engine and allow to cool

before undertaking any assembly or maintenance.

CHARGING THE BATTERY

This high pressure washer includes on board charging of the battery.

This means that while the engine is running, it is also maintaining the

charge of the lead acid battery.

Should your lead acid battery be in a state of no charge due to long

storage period, the pressure washer must be started using the recoil

starter.

Once the engine is started using the recoil starter, the lead acid battery

will be charged via the running of the engine.

Installing the Lead-acid battery. (see fig. A1-A4)

1. Remove the screws from the battery compartment using a 10mm

spanner holding the rear nut in place and using a second 10mm

spanner to turn the screw head in an anti-clockwise direction

2. Remove the screws and nuts and the battery compartment (10) panel.

3. Place the lead-acid battery in the battery compartment with the

battery electrodes facing the front of the machine.

4. Remove the plastic protectors from the electrodes on the lead-acid

battery (49)

5. Connect the red electrode (+) wire to the red electrode (+) connection,

and the black electrode (-) wire to the black electrode (-) connection

by applying the screws provided in the box of the lead-acid battery

(49). Insert the 2 washers from the rear of the electrode,

and place the nut on the opposite side. Finger tighten by hand, then

using 2 x 10mm spanners (supplied) use one spanner to hold the nut

in place, and the other spanner to tighten rotating in a clockwise

ASSEMBLY

Содержание Workzone titanium SHW196

























































Результаты поиска

Содержание Workzone titanium SHW196

Отзывы:

Похожие инструкции для Workzone titanium SHW196

Бренды по названию

Популярные бренды

ALDI Workzone titanium SHW196, Руководство пользователя

Результаты поиска

Содержание Workzone titanium SHW196

Отзывы:

Похожие инструкции для Workzone titanium SHW196

Бренды по названию

Популярные бренды