AE–1800 Instruction Manual
Customizing Operation via Menu System
4.11.6. Outpu t t i ng NAVTEX Messages of Specific Message Type
If you wish to output all messages of a specific message type, carry out the following
step–by–step instructions:
NOTE: A forced carriage return (
) will be replaced by an underscore ( _ ) (hex 5F ) when it
is output to an IBS/INS terminal or a printer.
(1) Highlight option “
5: M S G S E L E C TE D B Y TY P E
” on the
SELECT OUTPUT
MESSAGES
submenu, and then press
. This turns on another submenu with a
list of message types, enabling you to select the desired message type, as in the
example illustrated below:
Figure 4-22 Outputting Stored Messages of Message Type D – Example
(2) Using
/
, highlight the desired message type, and then press
. The
following window will pop up to indicate the outputting action in progress.
The window will be turned off automatically upon completion of outputting.
To cancel the action, press
.
(3) Press
to return to the previous menu or
to return to the first receiver
message screen.
6: SELECT OUTPUT MESSAGES
1: RECEIVING MSG
ON
I
OFF
I
2: ALL STORED MSG
3: MSG SELECTED BY FREQUENCY
4: MSG SELECTED BY STATION
5: MSG SELECTED BY TYPE
i
6: DISPLAYED MSG – ALL
7: DISPLAYED MSG – SPECIFIC
Select desired message type with
/
,
and then press
.
5: MSG SELECTED BY TYPE
A
B
C
i
D
i
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
OUTPUTTING STORED MESSAGES.
TO CANCEL, PRESS [CLR].
