AE–1800 Instruction Manual
Control Panel Functions
2. Cont rol Panel Funct ions
(
continued – 2 /12
)
②
Power Key
–
2/2
After the unit is switched on, the opening message window will be replaced with
another window listing the current settings of receiver control parameters, as in the
example below.
Figure 2-4 Current Settings of Receiver Control Parameters – Example
The above list will stay on for approximately 20 seconds before the message screen
shows up, replacing it automatically.
To turn the list off immediately, press
or
.
③
Keypad Dimmer Key
Pressing this key adjusts the keypad backlighting level in a total of 8 steps
including a completely switched–off level.
The last used level will be stored in memory. When the equipment is switched off
with the level at its minimum, the keypad will be lit at the highest level at next
power–up time.
④
Audible Monitor Key
Pressing this key allows you to audibly monitor the reception of a NAVTEX
transmission. To monitor the sound continuously, hold down the key. As soon as it is
released, the audible output is turned off.
(
continued on next page
)
CURRENT SETTINGS
1: FIRST RECEIVER:
REJECTED
STATIONS:
REJECTED MESSAGE TYPES:
G I
M
N O P Q R S T U W X Y
2: SECOND RECEIVER:
REJECTED
STATIONS:
REJECTED MESSAGE TYPES:
G I
M
N O P Q R S T U W X Y
3: KEYPRESS BEEP:
O N
4: DISABLED MSG ALARMS:
A B L
5: RECEIVING MSG OUTPUT:
OFF
6: 2ND RECEIVER FREQ.:
4 9 0 K H Z
7: DISPLAY SLEEP MODE:
5 M I N . / 3 0M I N.
I
PRESS [ CLR] OR [ ENT ] TO START
.
Blinks in reverse video.
