Alcorn Mcbride A/V Binloop Uncompressed, Руководство пользователя

Страница: 86 / 123

Alcorn McBride A/V Binloop Uncompressed User’s Manual Page 76
Reproducer Status LED
Each reproducer has a single multi-color LED located directly above the
SSD slot. The color and blink pattern of this LED signifies the current
state of the reproducer Here’s a table of those states and the
corresponding LED behavior:
LED State Reproducer State
Off Stopped
Green Playing
Orange Paused, Stilled, or Searched
Red Audio Muted
Flashing Red Fault
Pulsing Green Power-on Initialization
Pulsing White Firmware Update
Pulsing Orange Formatting SSD
Reproducer Test Button
Each reproducer has a test button located directly above the SSD slot.
As you can probably tell from the name, this button is intended only for
testing purposes and not for normal operational control. When this
button is pressed, the reproducer reacts differently depending on its
current state.
Note: Clip Number 1 is
VID00001. Please refer to the
Media Files chapter in this
manual for further details on
clip naming.
1. If the reproducer is stopped, pressing this button will cause the
lowest numbered file to start playing.
2. If the reproducer is playing, pressing this button will cause it to
stop playing.
3. If the reproducer is in a fault condition (status LED flashing
red), pressing this button will clear the fault.