Alcorn Mcbride A/V Binloop Uncompressed, Руководство пользователя

Страница: 45 / 123

Alcorn McBride A/V Binloop Uncompressed User’s Manual Page 35
Loop Clip
Description: This command functions exactly like the Play Clip command, except that the
video loops once the end of the clip is reached.
Command:
nnnnaaaLP
Parameters: nnnn is an ASCII file number between 0-1023
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Examples:
Loop File 3 on Reproducer #1: 3R1LP
Loop File 4 on Group #2: 4G2LP
Loop File 52 on All Reproducers: 52*LP
Synchronously Play Clip
Description: This command functions exactly like the Play Clip command, except that the
playback does not begin as quickly as possible. Instead, the reproducer waits a
consistent amount of time (
60 SMPTE frames by default) after the command is
received before it starts playback. This ensures that all reproducers that receive
this command at the same time, start playing at the same time.
Command:
nnnnaaaSP
Parameters: nnnn is an ASCII file number between 0-1023
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Gxx – Group address between G1-G13
Fx – 4K Group, F1 or F2
* - Wildcard address for all reproducers
Response: R
Comments: This command is almost always addressed to either a Group or All reproducers
to ensure that they all start playing synchronously.
Examples:
Synchronously Play File 2 on Group 1: 2G1SP
Synchronously Play File 2 on 4K Group 1: 2F1SP
Synchronously Play File 2 on All Reproducers: 2*SP