Alcorn Mcbride A/V Binloop Uncompressed, Руководство пользователя

Страница: 121 / 123

Alcorn McBride A/V Binloop Uncompressed User’s Manual Page 111
Appendix B - Updating Firmware
The various components of the Binloop are all capable of
accepting firmware updates. The following guides will instruct
you on how to update the firmware of each component.
Reproducer Card Firmware
The Repro2KU Uncompressed Video Reproducers within the
Binloop can be updated by copying a firmware update file to a
SSD and inserting the drive into the Reproducer’s SSD slot.
These step-by-step instructions will walk you through this
process:
1. Download the latest firmware for the Repro2KU from:
http://www.alcorn.com/support/firmware.html
2. Extract the zipped firmware update file to your PC.
3. Power down the Binloop, and remove the SSD from the
reproducer you wish to update.
4. Copy the OS.NEW file from the downloaded update to
the SSD using a SATA dock or USB to SATA cable.
5. Re-insert the SSD into the Reproducer.
6. Power on the Binloop.
7. The reproducer’s status LED will turn WHITE to indicate
that it is updating the firmware.
8. Wait for LED to turn off, indicating that the firmware
update is complete.
9. When you reach this point, you’re done. The OS.NEW
file will be renamed to OS.SAV to flag the successful
operation.
10. Use the Version command to verify that the
Reproducer’s firmware has actually been updated to
match the version on the website.
11. Repeat this process for each reproducer.
NOTE: If multiple updates are to be performed, you can rename
OS.NEW to FACTORY.NEW . This causes the update to occur without
the file name changing to OS.SAV after the update is complete. This
allows you to update an entire cage of reproducer cards with a single
SSD containing the
FACTORY.NEW file.