Alcorn Mcbride A/V Binloop Uncompressed, Руководство пользователя

Страница: 44 / 123

Alcorn McBride A/V Binloop Uncompressed User’s Manual Page 34
Loop / Resume
Description: This command functions just like the Play / Resume command except that the
video loops once the end of the clip is reached.
Command:
aaaLP
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Gxx – Group address between G1-G13
Fx – 4K Group, F1 or F2
* - Wildcard address for all reproducers
Response: R
Example: Search File 1 on 4K Group #2: 1F2SE
Loop pre-searched file on 4K Group #2: F2LP
Play Clip
Description: This command will play the specified clip on the addressed reproducer card(s).
Playback starts as soon as possible after the command is received.
Command:
nnnnaaaPL
Parameters: nnnn is an ASCII file number between 0-1023
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Comments: Since playback starts as quickly as possible once this command is received, it
should never be used for synchronous playback. For this, you should use the
Synchronous Play command for a consistent synchronized start of playback.
Using a Search command along with a timed Play/Resume command works well
for synchronous playback too.
Examples: Play File 3 on Reproducer #1: 3R1PL
Play File 4 on Group #2: 4G2PL
Play File 52 on All Reproducers: 52*PL