Alcorn Mcbride A/V Binloop Uncompressed, Руководство пользователя

Страница: 85 / 123

Alcorn McBride A/V Binloop Uncompressed User’s Manual Page 75
Display and Menu Wheel
The Binloop is equipped with 2x16 character LCD Display. This display
is primarily used to indicate the current status of the Binloop. Here’s an
example of that status display:
The current SMPTE mode is indicated at the top-left of this screen. The
3 possible modes are displayed as
Gen , Gen* (Generate /w V-Sync),
and Read. The current state of the SMPTE generator/reader is
displayed at the bottom left, and the SMPTE frame rate is displayed at
the bottom right. The time at the top-right of the display represents the
current SMPTE timecode value in hours, minutes, seconds, and frames.
In the event that there is no current timecode value (meaning timecode is
not currently being read or generated), this time will be displayed as
dashes like the following example:
In addition to providing system status, the display can also be used in
conjunction with the nearby Menu Wheel to access the configuration
settings of the Binloop. To enter this menu, simply press in the menu
wheel.
Note: The menu wheel ‘clicks’
when rotated to provide tactile
feedback between selections.
After you do this, you can navigate through the various settings of the
Binloop by rotating the menu wheel to change the selection, and
pressing it to select the current item. When you are finished, simply
browse to the ‘Exit’ selection and push the menu wheel to return to
the status screen. To see a complete map of this menu interface,
refer to
Appendix D - Wheel Menu Map .