Alcorn Mcbride A/V Binloop Uncompressed, Руководство пользователя

Страница: 34 / 123

Alcorn McBride A/V Binloop Uncompressed User’s Manual Page 24
Get SMPTE Firmware Version
Description: This command will return the firmware version of the SMPTE module.
Comments:
It is possible for the SMPTE firmware to be corrupted. If this occurs, this
command will return a hardware error (E01).
Command:
?S
Response: SMPTE Vx.xx
Example:
Command: ?S
Response: SMPTE V1.23
Get/Set Unit ID
Description: This command will get or set the unit ID number.
Parameters:
xx represents a decimal number between 1 – 49.
Set Command:
xxID
Response: R
Example:
Command: 1ID
Response R
Get Command: ID
Response: xx
Example:
Command: ID
Response: 1
Get/Set IP address
Description: This command will get or set the unit IP address.
Parameters:
xxx.xxx.xxx.xxx represents a standard IPv4 IP address.
Get Command:
IP
Response: xxx.xxx.xxx.xxx
Example:
Command: IP
Response: 192.168.0.254
Set Command:
xxx.xxx.xxx.xxxIP
Response: R
Example:
Command: 192.168.0.254IP
Response: R